LED Strip Lights are popular for their versatility and function. These lights are becoming a trend because they can make a total transformation to your space!
A brand that does magic is Govee, presenting LED Lights that can be customized and connected to Alexa and Google Assistant. The common question users ask is “Can you cut Govee LED Lights?”.
On this page, you’ll learn useful information about LED lights and how to cut them. Let’s start!
What are Govee LED Lights?
Govee LED Lights are a type of LED strip light that have a wide selection of colors. These multicolor lights are customizable with up to 16 million color choices!
What’s great is that they consume only a little amount of power yet they can make your space appear brighter and bigger. Govee LED strip lights are highly energy-efficient – their power to light conversion is high when compared to other types of lights.
These LED lights have the advantage of being hazard-free. Because they convert a significant amount of energy to light other than heat, you won’t have to worry about fires or electrical damage. The risk for these accidents is relatively low. Govee LED lights can be operated safely.
Govee LED lights are known to fit any room. They’re very flexible and can adapt to whatever the vibe of your space is.
This makes Gove LED lights popular. They can be used for your gaming set-up, movie room, romantic space, and more! Plus, they are very easy to install.
Other than that, this type of LED light is made of non-toxic materials. For this reason, operation and disposal are both very safe.
Govee LED lights offer more awesome features: They can be connected to Alexa and Google Assistant.
Having this technology allows you to control the light settings without any hassle. You can use your voice to command the lights to power on or off, adjust their brightness, or change colors. How amazing is that!
Types of Govee LED Lights
Several types of LED lights are made available by Govee. Understanding these different types will help you choose which is best for your space.
RGB Govee LED Lights
RGB Govee lights have great light quality even when set at the lowest brightness. They do not contain an Independent Control Chip or “IC chip” so this type of light can only work with one color at a time.
RGBIC Govee LED Strip Lights
RGBIC Govee lights have IC chips. They allow multiple colors to be displayed in one light strip at a time. This way, you can set each segment’s color. When it comes to brightness, RGBIC LEDs give off brighter light than RGB.
Waterproof Govee LED Strip Lights
If you want to place Govee LED strip lights where they are exposed to moisture and water, buying Waterproof Govee LED lights is a great choice! Not all Govee LEDs are waterproof, so it’s best to review each model to be safe.
Non-waterproof Govee LED Lights
This type of Govee LEDs is best used for indoor settings. Be careful not to expose them to water!
Here is a quick guide for you:
|Waterproof Govee LED Lights||Non-waterproof Govee LED Lights|
Can You Cut Govee LED Lights?
Govee LED Lights can be easily installed. But, what happens if your strip light is too long for your space? Do you buy a new one? Or can you cut Govee LED lights instead? Our answer: Yes! It’s easy to cut RGB Govee LED strips.
RGB Govee LED lights can be cut according to your preferred length. It’s a quick process to do and you just need a pair of scissors or a sharp knife to complete the task.
It’s safe to splice LED lights because they’re made to be cut. You won’t get an electrical shock so you do not have to worry about it.
You have to remember that this only works for RGB Govee lights. RGBIC Govee lights may get damaged if you cut them.
The reason for this is that RGBIC lights have IC chips which, as mentioned earlier, allow them to be customized. To ensure that you do not damage your Govee LED lights, be wary of this tip.
How to Cut Govee LED lights
Grab a sharp pair of scissors or a knife. Follow these steps to personalize your LED lights easily:
1. Check if the lights are working.
It’s a pretty silly step, but this is very important before you begin cutting your Govee LED lights. You don’t want to make every effort and find out that they don’t light up well after.
Also, cutting Govee lights can void your warranty, so before starting any cut, check if the lights work perfectly.
2. Locate the small black lines.
Black lines are situated in every gold mark. This is where you will cut the Govee LED light. If you unwittingly cut beyond the black line, the LED lights will be damaged.
3. Determine your desired length.
Be sure that you know the measurement of your desired length. Be careful not to cut it too short or too long. To ensure this, you might want to get a market to locate the area where you are going to cut.
4. Cut the LED strip.
Using a sharp pair of scissors or a knife, cut the LED strip following the marking. Do not cut elsewhere as the light may stop working if you do so.
5. Connect your Govee lights to a power source.
There are two ways you can connect Govee lights to a power source: by using a quick connector or soldering the LEDs together. Let’s discuss this in the next section.
Connect LEDs by Using a Quick Connector
Using a quick connector is an easy way to put your Govee LED lights together. A quick connector is readily available in hardware stores. You don’t need any special equipment to use a quick connector. Here’s how to do it:
- Cut the translucent plastic bar around the copper pads. Do this carefully with a sharp knife or pull it forward very gently.
- Insert the light into the strip connector. If you’re using an LS-10 connector, make sure that the strip goes below the ridges on either side. Do these steps gently. Never force the insertion as this can damage your Govee lights.
- Ensure that the parts match each other perfectly. As you see, there are + and – symbols at the back of the copper dots. Connect the black wire with the – sign and the red wire with the + sign.
If you’re unsure about the materials to complete your setup, we’re here to help you out. Connect the LED lights to the corresponding power supply by following this guide:
Requires 1 female DC adapter and 1 solderless connector
Requires solder and iron
Open wires or solderless connector
Requires 1 female DC adapter
Requires 1 female and 1 male DC adapter
No adapters necessary
Requires 1 male DC adapter
The first row represents the power supply and the leftmost column is for the LED strip. Find where the power supply side and the LED strip side intersect. Then, you’ll know what you need for your setup.
Connect LED Lights by Soldering
To solder the LED lights together, follow the steps below:
- Locate the copper dots. This is where you’ll melt the solder.
- Melt the solder. Be careful to only create small puddles of metal onto the copper dots.
- Twist the wires so the frayed strands wrangle together. Melt the solder onto the exposed wires.
- Match the red wire with the + sign and the black wire with the – sign.
- Connect the wires to a power source.
- Cover the connection between the wires and the Govee LED lights so they are not exposed to causes that may interfere with the electric connection.
Test the lights out and that’s it! You’ve successfully cut and connected your Govee LED lights together.
How to Connect Govee Strip Lights to Alexa or Google Assistant
If you have WiFi strip lights, connecting them to Alexa or Google Assistant is a no-brainer. Follow these two quick steps:
- Download the Govee Home app to your device. This is available on Google Play and the App Store.
- Name your Govee LED Lights. We recommend naming it according to the light’s location, such as “Living room”.
- Enable “Govee Home” Skill on the Amazon Alexa App.
If you can’t find Govee Home, sign in to your Govee Home account via the Alexa App. Add the Govee LED to your devices and you’re good to go!
Here are examples of commands supported by Alexa:
- Alexa, turn on Govee lights.
- Alexa, turn off Govee lights.
You can also brighten and dim the Govee lights and specify their brightness level. Try the following commands:
- Alexa, set Govee lights to 85%.
- Alexa, brighten/dim Govee lights.
To change the colors, try the commands below:
- Alexa, set the Govee lights to blue.
- Alexa, change the Govee lights to red.
To answer your question “can you cut Govee LED lights”, Govee LED lights are easy to install and can be cut safely.
Before cutting Govee LED Lights, tick off the guidelines we’ve laid out for you so you ensure that the lights can operate to their highest performance, incurring no damage.